WORLDWIDE SOURCING

The only importer from the world.
United States, Canada, UK, France, UAE, Dubai, Singapore, Japan, Korea, Myanma, Cambodia, Laos

 

EXPERTISE IN IMPORTING/EXPORTING

S.Suvit Trading Ltd., Parts is the only drill trader in Thailand expertise in importing exporting throughout the world. We have been importing drills from every continent with different specs and brands. Each Country has its preferred specification/ condition and usage. With years of experience, we import only the best-used drill with outstanding durability and value. Cheap units may cause long-run downtime. In addition to our world-class drill seeker, we are fully equipped with people and processes to enhance greater value with low cost while keeping its life highest among traders in Thailand.

Import Countries include

United States | Canada | United Kingdom | France | United Arab Emirates | Dubai 

Japan | Korea | Singapore | Australia | New Zealand

AbtPQ_edited.jpg

PROFESSIONAL QUALITY

The only Original Equipment(OE) quality in Thailand.
Original Programs, Original Safety, OEM Parts, Quality Professional/Process and Quality Inspection

 

ORIGINAL QUALITY WITH HIGHEST VALUE

With over 40 years of experience, we realize the original program and OEM parts are the best way for the highest value with lowest downtime. The original program utilizes various sensors to detect the anomaly and extends its service life; the drill automatically stops the engine when severe error detected. Neglecting anomaly may causes catastrophe costly damage and substantially lower drill's life in the long run. Also, with OEM parts, it further minimizes downtime while reducing costs in the long term. However, most drill traders usually neglect Original Safety and/or OEM parts due to cost and complexity of its repairs.

Here at S.Suvit Trading, we are the only seller to restore the Original program with full arrays of Safety sensor. They are expensive, rare and complex restoration but it's the only way to make sure the lowest downtime with the highest quality. We also directly import key OEM parts from Korea and Japan to make sure it's longevity life while our competitors may use 2nd-grade parts to make a cheaper yet attractive choice while bypassing safety or removing damage sensor are common among other traders, but this ends up lower cost but poor value in the long-run with long downtime.

SERVICE STATIONS

 
AbtStrRepShop_edited.jpg

Structural Repairs

Main Structure

Suspension

Engine Casing

Cabin

AbtEng_edited.jpg

Engine Shop

Engine

Gearbox

Air Compressors

Hydraulic Pump

Cooling System

AbtAirCom_edited.jpg

Air Compressor

Shop

Compressor Housing

Main Bearing

Lubrication

Separator Receiver

O/H Sensors

AbtComDiag_edited.jpg

Electronics Shop

CAT ET3 Diagnostics

CX-One

Original Service

Original Maintenance

 
AbtArch_edited.jpg

ACHIEVEMENT

Most Reliable Trader | Highest Sales Nationwide | OEM Parts and Repairs Quality

MOST RELIABLE DRILL IN THE MARKET

Since 1968, S.Suvit Trading Ltd., Parts has been importing and delivered used drill with highest standards. Each day we gain valuable experience in drill technologies while our people and management adapt and keep the direction of offering the highest quality drill to the market. At the moment, we achieved the lowest defect rate with minimum downtime. All drill leaves the factory must pass very strict Quality Assurance in including

             - Movement Speed/ Power

             - Zero Leakage

             - All Gauges functions

             - Drifter Inspection/ Impact Testing

             - Air Conditions

             - Stress Test for Engine/ Air Compressors

             - Hydraulic Pressure in every key points

             - Rod Changing/ Clamping Test

             - All lubrication points

All these key inspection points are monitors based on original service booklet combine with our own expereiences to make sure minimum failures, highest used drill standards, and maximum value in the long run. All precondition drill comes with 30-60-90 days warranty based on service plans.

HIGHEST IMPORTED DRILL SALES

S.Suvit Trading has sold over 60  Crawler Drills from Thailand and CLMV countries. Our sales came from ONLY IMPORTED drill; not a single one comes from reselling within Thailand due to its condition/ usage. Rebuilding local drill into high quality one requires excessive resources and not financially and economical in the long run, while WINDOW DRESSING poorly condition local drill is available from other trader.

At the moment, we have a strong network of partners throughout the country. We aim to be the best drill supplier for your business. For inquiries, please contact our sales representative.

OEM QUALITY PARTS AND REPAIRS

For years, we thrive to get the Original Quality Parts while keeping cost low. However, this is impossible to get right parts with sufficient standard here in Thailand. Local part is limited and mostly below par quality. With our wide partners worldwide, we are importing, selling OEM Quality Parts with highest quality Repairs available nationwide.

*Due to our resource limitation, our parts selling will be available through online channel soon. Only off-site repairs parts and service available.

ProductPagePromotion_edited.jpg

OUR STORY

Focus on Quality from the beginning

 

QUALITY IS OUR THE FIRST PRIORITY

PRICE IS OUR SECOND

Since 1968, S.Suvit Trading Ltd., Parts started our business from Air Compressors, Pneumatic handheld drill, and later to Furukawa Air Track Drill. At first, we specialize in Air Compressors of all types and we are the only company to complete a wide range of solutions for customers for A/C with quality from the start. Later, we entered into Air Track business. While other sellers, did import-and-sell with minimum repairs and lower cost, we focused on making the drill the longest life while keep value high.

Years Later, the company expanded into a Hydraulic drill started with small size 9 Series and 12 Series afterward. We successfully gain the highest drill sales due to the high reliability and low-cost of our machine. We invested in the best people, the best parts, and the best technologies. Nowadays, we are the only company to program and setup Omron NSJ DCU years ahead of our competitor. This year, we successfully overhaul CAT 3126/C7 Injector, with the help of our partner in the US, and become the only drill trader who can archive this. 

Here we have never stop learning experience how to offer a better drill while keeping value high. Cheap drill does sell in the market but, to us, the quality of the drill comes first while the cost is our second priority. Total-Cost-of-ownership is our target, not the price.